Durability of Building Materials and Components 8Volume one of a set of four, this text contains the proceedings of the 8th International Conference on Building Materials and Componenets (8dbmc) held in Vancouver in 1999. The book contains four parts each reflecting contributions made to the durability of specific building materials, namely: concrete, masonry, wood and polymers. |
Contents
Degradation mechanisms and service life of concrete slabs | 16 |
Estimation of service life of concrete pipes in sewer networks | 36 |
The real service life of road bridges in Sweden a case study | 56 |
Properties of and service life predictions for high performance | 71 |
a GIS approach | 84 |
An engineered model for service life of marine concrete structures | 94 |
Survey of the durability of the facades of 4000 dwellings in northern | 97 |
Service life prediction of flat roofs with polymer modified | 103 |
EDS analysis as a prediction method for cement degradation in | 290 |
Prediction of concrete crack opening caused by reinforcing | 300 |
The use of galvanostatic pulse measurements to determine corrosion | 310 |
The evaluation of flexural strength of RC beams damaged by rebar | 320 |
a comprehensive experimental program | 331 |
A Miltenberger J J Luciano and B D Miller | 341 |
Prediction of corrosion resistance of concrete structures | 354 |
A simplified method to estimate corrosion rates a new approach | 376 |
STUDIES ON STRENGTH AND DURABILITY OF CONCRETE | 105 |
Performance of strained bituminous waterproofing membranes | 108 |
Effect of matrix proportions and curing temperature on | 118 |
Development of a reliabilitybased durability design method | 120 |
Investigations of mass and energy flow in existing buildings | 133 |
Degradation analysis by statistical methods | 134 |
Avoiding the thaumasite form of sulfate attack | 139 |
Assessment of building rehabilitation expediency in Bulgaria | 158 |
Microstructure of autoclaved aerated concrete subjected | 159 |
Facility lifecycle cost analysis based on fuzzy sets theory | 171 |
The use of performance and durability data in assessment of life | 172 |
Experimentation on physical durability of multilayer panels cast | 180 |
integrating the supply chain | 183 |
Tenets of sustainable roofing | 196 |
Characterisation of impact damage in fibrereinforced cement | 201 |
A prototype distributed CIC system based on IAI standards | 208 |
Analysis of phenomenological perceptions of effectiveness | 220 |
Assessment and interpretation of insitu strength of concrete | 222 |
Investigation and diagnosis of reinforced concrete structures | 231 |
Using images pattern recognition and neural networks for coating | 233 |
Project management issues in remote CAD outsourcing | 245 |
SO environment degradation of synthetic pastes of Portland cement | 246 |
Effect of repeated load on micro structure and carbonation | 256 |
A building lifecycle information system for tracking building | 257 |
Industry foundation class modeling for estimating and scheduling | 270 |
The development of an integrated life cycle costing model using | 276 |
Durability of cracked fibre reinforced concrete structures exposed | 280 |
Sustainability by strengthening the relation between disciplines | 377 |
Characterization of chloride environment along a highway | 399 |
Quality control problems in high performance concrete structures | 436 |
Durable concrete through skin treatment with | 453 |
Concrete products using fine aggregate recycled from waste | 475 |
Durability of polymer modified and impregnated gypsum | 485 |
Bearing strength of concrete containing polystyrene aggregate | 505 |
Physical and mathematical modelling of masonry deterioration | 527 |
Characterisation of materials used in the replacement of sculptures | 550 |
Long term migration of silicone into stone and its prevention | 593 |
Mapping of visual decay forms and infrared imaging of stone | 613 |
Survey results regarding attitude towards stonecleaning of building | 635 |
Durability of renovated and painted wooden windows | 658 |
Inservice moisture content of hardboard lap siding in Southern | 680 |
The residual strength of timber degraded by woodworm infestation | 714 |
the 4 | 734 |
Models for timber decay and termite attack | 756 |
Durability of wood | 780 |
Development of a durability classification system for protective | 801 |
Correlation of the effects of artificial and natural weathering | 814 |
New prediction methods of service life of polymeric finishing | 835 |
A new type of clear coating systems for wood | 854 |
The effect of heat aging on acrylonitrilebutadienestyrene ABS | 873 |
Other editions - View all
Durability of Building Materials and Components 8 National Research Council Canada Limited preview - 1999 |
Durability of Building Materials and Components 8 National Research Council Canada Limited preview - 1999 |
Common terms and phrases
accelerated acid adhesive analysis ASTM beams Building Materials Canada carbonation chloride content chloride diffusion coefficient chloride ions chloride penetration coating Components 8 Volume compressive strength concentration concrete cover concrete structures construction corrosion corrosion rate crack width curing cycles D.J. Vanier damage decay depth deterioration determined developed diffusion coefficient drying Durability of Building Edited by M.A. effect environment evaluation exposure factors fly ash gypsum humidity increase investigation kg/m³ laboratory Lacasse and D.J. load M.A. Lacasse Materials and Components measured modulus moisture content mortar NRC Research Press Ottawa panels parameters permeability polystyrene pore porosity Portland cement pozzolanic prestressing Published in 1999 ratio rebar reinforced concrete resin resistance samples shotcrete shown shrinkage silica fume silicone slab specimens stone stresses sulfuric acid surface Table techniques temperature tensile stresses test method timber types values wall water-cement ratio weathering wood