| Augustus Jay Du Bois - Bridges - 1883 - 436 pages
...member must fit closely together, and when riveted shall be free from twists, bends or open joints. 83. All joints in riveted work, whether in tension or...as no reliance will be placed upon abutting joints and no account shall be taken of the friction between riveted plates. All joints, however, shall be... | |
| John Alexander Low Waddell - Bridges - 1885 - 378 pages
...member must fit closely together, and when riveted shall be free from twists, bends, or open joints. All joints in riveted work, whether in tension or...reliance will be placed upon abutting joints. The abutting- ends, however, must be dressed straight and true so that there shall be no open joints. All... | |
| Engineers Club of Philadelphia - Engineering - 1892 - 432 pages
...wide will have three rows of rivets with 9 inches pitch for the outer row. 93. All joints in flanges, whether in tension or compression members, must be...straight and true, so that there shall be no open joints. 94. Flange angles must be spliced with angle covers whenever cut within the length of the girder. 9o.... | |
| William Harvey Birkmire - Girders - 1893 - 178 pages
...must fit closely together, and, when riveted, shall be free from twists, bends, or open joints. 13. All joints in riveted work, whether in tension or...straight and true, so that there shall be no open joints. 14. All bed-plates under bearings of girders must be of such dimensions that the greatest pressure... | |
| William Harvey Birkmire - Girders - 1893 - 164 pages
...must fit closely together, and, when riveted, shall be free from twists, bends, or open joints. 13. All joints in riveted work, whether in tension or...straight and true, so that there shall be no open joints. 14. All bed-plates under bearings of girders must be of such dimensions that the greatest pressure... | |
| John Butler Johnson, Charles Walter Bryan, Frederick Eugene Turneaure - Bridges - 1893 - 636 pages
...wide will have three rows of rivets with 9 inches pitch for the outer row. 93. All joints in flanges, whether in tension or compression members, must be...straight and true, so that there shall be no open joints. 94. Flange angles must be spliced with angle-covers whenever cut within the length of the girder. 95.... | |
| Mansfield Merriman, Henry Sylvester Jacoby - Graphic statics - 1894 - 500 pages
...wide will have three rows of rivets with 9 inches pitch for the outer row. 93. All joints in flanges, whether in tension or compression members, must be...straight and true, so that there shall be no open joints. 94. Flange angles must be spliced with angle covers wherever cut within the length of the girder. 95.... | |
| Andrews Allen - 1897 - 170 pages
...faced in such a manner that perfect contact "between the ends of the a"butting mem"bers is assured. The ends, however, must "be dressed straight and true, so that there shall "be no ' open Joints. Flange angles must "be spliced with angle covers whenever cut within the length of the girder. Pin... | |
| Pencoyd Iron Works - Building - 1898 - 412 pages
...plate on each side shall extend not less than 6 inches beyond the edge of the tie plate. Joints,— 08. All joints in riveted work, whether in tension or compression members, must be fully spliced. Pin connection, in riveted tension members shall have a section through the pinhole 25 per cent, in... | |
| Pencoyd Iron Works - Building - 1898 - 440 pages
...plate on each side shall extend not less than 6 inches beyond the edge of the tie plate. Joints.— 68. All joints in riveted work, whether in tension or compression members, must be fully spliced. Pin connection, in riveted tension members shall have a section through the pinhole 25 per cent. in... | |
| |